Today I decided to pull out my old Hero3, after updating it to the latest firmware I was surprised to find that the GoPro app would not connect successfully. What I found was that for whatever reason, the DHCP request from my mobile device (OPO in my case) was not received and or accepted by the camera, and no IP address was found. After some probing around I discovered that these cameras default to the 10.5.5/24 network.
So the solution was simple, in my wireless settings for the AP on the mobile device I manually configured the IP address to live on the 10.5.5/24 network by assigning it the IP address 10.5.5.2. The gateway and DNS are also assigned to 10.5.5.1 however I don’t believe this makes any difference on these devices.
So this morning I was kindly reminded again by my corporate IT overlords that my RSA soft token was going to be expiring in 9 days. Having had this token in place for a year now I had forgotten how to update it.
After a few minutes I recalled that the trick was as simple as
stoken import --file <my>.sdtid
Well that’s simple, except for the fact that in my case, this failed. After a quick bit of googling around I found that version 0.2 (which ships with my release of ubuntu) incorrectly identifies where the tokens are within the sdtid files resulting in an annoying error:
error: no valid token in file '<my>.sdtid': General failure
UGH! Well the solution is simple here. After a quick upgrade to 0.90 I’ve had no problems importing since.